Fiber Seat Board - Shield

Fiber Seat Boards are excellent replacement seats for chairs that had caned seats, cardboard seats, leather seats, etc.

This fiber seat board has an embossed design of an ornate shield It is molded to fit down into a hole in the chair seat.
Be sure the pattern size is smaller than the hole in your chair.

This replacement seat would require a hole with a minimum 11 1/4" x 11 1/4". Please note that this fiber seat comes in light reddish brown tone. The red can be toned down with a stain, if desired. Contact us with questions.
Browse our stain selection.

View the installation tutorial here.

Dimensions:

• Untrimmed Seat: 14 1/2" x 14 1/2"
• Front to back (A): 11"
• Left to right at back of pattern (B): 9"
• Left to right at front of pattern (C): 11"

We recommend using the Decorative Upholstery Tack, Low Domed Head (T1) or T7 for installation of the seats because they have small heads with a low dome. The nails can be spaced according to taste, but not to exceed two inches from center of tack to center of tack.