Red Oak Rift Cut Veneer. Red oak has a bit of a pinkish tint & is a little bit lighter than white oak. White oak tends to be a bit browner, darker and more yellow. When you stain them, the difference between the two decreases, especially the darker you go. This rift cut is derived by slicing red oak at a slight angle to minimize the irregularities in the wood.

Flexible Veneer consists of 1/64" thick real wood veneer permanently bonded under heat and pressure to a 10 millimeter non-woven fiber backing, allowing it to be applied to curved surfaces. It can be applied to almost any substrate, including metal, plywood, particle board, etc. This veneer finishes like any other real wood and can be lightly sanded, sealed, stained, filled, and finished with top coats.

Each piece of veneer is 24" wide. It is sold by the linear foot. Select the quantity of continuous feet.