Fruit and Leaves Wooden Pull

Write a Review

Walnut Fruit and Leaves Wooden Pull.  From the Victorian era. Mounting hardware not included.

**You must indicate left or right handed when ordering**

Available in 2 Sizes:

  • Small -  2 1/8" high x 5" wide   Projection: 13/16"
  • Medium -  2 13/16" high x 7" wide   Projection: 1"

 Your Options For Mounting:

Often times, screws are not provided with the purchase of wood handles.  The reason is because the thickness of the material you will be mounting to is unknown.  So the length of the screw needed must be determined by the installer.

For this Leafnut Pull, there are 2 possible ways you might attach it to a drawer:

1. You can run screws through the back of the drawer into the handle, paying close attention to what length of screw is long enough to go through the drawer face and into the handle, without poking through the front of the handle.  (This is not a good look!)

2. Another option is to glue the handle to the drawer face and then reinforce the bond by installing small finish nails through the front of the handle.  This will require you to countersink the nails a bit and then fill the holes with one-part filler to cover the heads of the nails.