Fiber Seat Board - Birds Nesting

Write a Review

This fiber seat board is embossed and is molded to fit down into the chair seat. Be sure that the pattern size is smaller than the hole in your chair.

This replacement seat would require a round hole with a minimum 11 1/8" diameter. Please note that this fiber seat comes in light reddish brown tone. The red often can be toned down with a stain. Contact us with questions and please see our stain section.
Browse our stain selection.
View the installation tutorial here.

 photo 1_zps350f441a.jpg

  • Untrimmed Seat: 14  1/2" x 14  1/2"
  • Pattern diameter & minimum hole size (A): 11 1/8"

We recommend using item T7 or T1 for installation of the seats because they have small heads with a low dome. The nails can be spaced according to taste, but not to exceed two inches from center of tack to center of tack.