How to Install Fiber Seats

Supplies Needed:
Replacement Seat
Decorative Nails
100 to 150 grit Sand Paper
Thick sheet of Paper
Pencil
Power saw or a sharp Knife
Ruler or Tape Measure




Fiber seats are used in chairs that originally had a leather seat, a wooden seat, or a caned seat, such as the chair pictured.

This chair is an ideal candidate for a fiber seat!

 photo 1_zps350f441a.jpg



This is a fiber seat, in all its glory... Just waiting to be shaped and attached to a chair!

 photo 2_zpsbf4a49ff.jpg



First, get a piece of a thick paper about the diameter of the chair's seat, then crease the paper on the inner edges of the seat's hole. This should give you a fairly accurate size of the hole itself.

 photo 3_zps397f2235.jpg



You will want your fiber seat to be at least 1" Larger than the hole on All of the sides.
To do this: Take a measuring instrument, and trace a line ~1" outward from the crease. This will be the pattern for your Fiber Seat.

 photo 4_zps88a759d5.jpg


Once satisfied with the shape, cut the paper along your outer line.

Center the pattern on the topside of the fiber seat and trace it with a pencil.

 photo 5_zps9eeaedae.jpg



Using a pencil will allow you to make adjustments, if needed.

 photo 6_zps11e8e8d3.jpg



Cut the fiber seat using a band saw, scroll saw or jigsaw for best results. If using a jigsaw, use a fine blade for metal and wood cutting.
If a power saw is unavailable, a sharp craft knife will work.
To do this, carefully cut in short segments along the line several times until you've cut through the fiber.

 photo 7_zpsc4d55679.jpg



Sand the edge of the seat to a smooth bevel using from 100 to 150 grit sand paper.

 photo 8_zps3bdd8ed7.jpg



You can add protection and a little color to your seat by applying a clear finish. If you would like more color options, you may apply a Stain, oil-based paint or water-based paint & clear finish to the Fiber Seat.

 photo 9_zpsc50f9533.jpg
*It is a good idea to experiment with the color on the back of the seat board, or on the cut off scraps, to be sure you'll get the desired color.


Attach the seat to the chair using Decorative Tacks. Space the tacks according to your preference, but not to exceed 2" from center of tack to center of tack.

 photo 10_zps3cd4c958.jpg

 photo DSC_0267_zps94d9ba40.jpg

There you have it! You have now completed your Fiber Seat lesson, and should you have any additional questions, feel free to Contact Us!